Good day to all. I encountered a problem that after turning on the Cisco 3560 switch, all the indicators on the Internet ports start blinking. The console displays this error. What should I do in this situation? Can I solve this problem myself?
!!! WARNING: The switch is not usable !!!
Press RETURN to get started!
*Mar 1 00:00:34.384: %HARDWARE-3-MCU_I2C_READ_ERROR: I2C read failed in MCU and attached devices (e.g. Temperature Sensor) can't be read.
*Mar 1 00:00:46.430: %PLATFORM_IPC-3-COMMON: Init failed before IPC init
-Traceback= 17055D8 160EAE8 29E1E40 29E1ED8 1F50DFC 1F51068 1BA87AC 1B9EF80
*Mar 1 00:00:46.833: hl2mcm_core_process: hl2mcm_install_hl2mcm_ctrl_entries() failed.
*Mar 1 00:00:46.833: %SYS-3-HARIKARI: Process HL2MCM top-level routine exited
*Mar 1 00:00:47.840: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlanCannot Get the number of ports in MAC notification
*Mar 1 00:00:48.402: %SW_VLAN-4-IFS_FAILURE: VLAN manager encountered file operation error: call = ifs_read_until (header) / file = / code = 21 (Is a directory) / bytes transfered = -1
-Traceback= 11ABE88 11ABAC4 115FE68 1BA87AC 1B9EF80
*Mar 1 00:00:50.088: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3560 Software (C3560-IPSERVICESK9-M), Version 12.2(55)SE11, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Wed 17-Aug-16 13:07 by prod_rel_team
*Mar 1 00:00:50.214: Unable to open UDP socket on CMP_PORT
*Mar 1 00:00:50.222: %SYS-3-MGDTIMER: Running timer, init, timer = 3C1EBC0. -Process= "Connection Mgr", ipl= 0, pid= 139
-Traceback= 29D9A50 29D9BB4 29D9CA0 1F13980 1BA87AC 1B9EF80
