FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS Logs

[jdiegocasa]

Hi everybody

I need help to know what means the next log

007925: Mar 18 2013 08:40:31: %FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.

          Consistency run details : Timestamp 2013-03-18@08:40:31. Log Id: 9195

          Please use 'show platform feature-manager consistency-check log 9195'

          to get details about the failed consistency checks.

007926: Mar 18 2013 11:10:31: %FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.

          Consistency run details : Timestamp 2013-03-18@11:10:31. Log Id: 9200

          Please use 'show platform feature-manager consistency-check log 9200'

          to get details about the failed consistency checks.

It´s appears every 2 hrs aprox, on Catalyst 6509 with Sup 2T and IOS 15.0(1)SY1

I´ve been searching on Cisco Web but there is no information related.

[anallusa]

Hi Diego,

Could you update the outputs of the following commands?

show platform feature-manager consistency-check log 9195

show platform feature-manager consistency-check log 9200
show module
show diagnostic result module all detail

If this log message is throwing out every 2 hours, there should be a command asosciated with the error message. So, could you attach the outputs of the last 5 log message commands as well. For example,

show platform feature-manager consistency-check log 9205
show platform feature-manager consistency-check log 9210 
and so on...


Thanks,
Arun

[Jung Chih Tai]

Hi Arun,

I got the same messages with Sup2T and IOS 15.1(1)SY1 , the messages as below:

*Nov  6 07:28:37.323: %FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.

         Consistency run details : Timestamp 2013-11-06@07:18:37. Log Id: 6

         Please use 'show platform feature-manager consistency-check log 6'

         to get details about the failed consistency checks.

R#show platform feature-manager consistency-check log 6

=====================================

CONSISTENCY CHECKER : ENABLED

   remaining timer value: 726 seconds

=====================================

Log Id 6

Log Type  Dynamic Features

Timestamp 2013-11-06@07:18:37

Feature Manager auto-correct is currently enabled

-----------------------------------------

[1]:   Hardware Inconsistency (dynamic) : Timeout : Slot 1

         No response for dynamic request received

*Nov  6 07:58:37.322: %FM-6-FM_CONSISTENCY_CHECK_LOG_STATUS: Consistency Checker found inconsistency.

         Consistency run details : Timestamp 2013-11-06@07:48:37. Log Id: 7

         Please use 'show platform feature-manager consistency-check log 7'

         to get details about the failed consistency checks.

R#show platform feature-manager consistency-check log 7

=====================================

CONSISTENCY CHECKER : ENABLED

   remaining timer value: 622 seconds

=====================================

Log Id 7

Log Type  RBACL Feature

Timestamp 2013-11-06@07:48:37

Feature Manager auto-correct is currently enabled

-----------------------------------------

[1]:   Hardware Inconsistency (RBACL) : Timeout : Slot 1

         No response for rbacl request received

My chassis include VS-SUP2T-10G , WS-X6848-SFP, WS-X6848-GE-TX and WS-X6816-10GE.

Can I ignore these messages ?

Thanks,

JC