11-26-2014 01:25 AM - edited 03-07-2019 09:40 PM
Dear Friends,
I am getting continuous below mentioned error in my core switch. Please help on this.
Apr 11 00:59:59.539: PRST-VBL DET - Util Set - nameval=NTPv4_Drift=0.0 and node->nameval=NTPv4_Drift=0.0.
Apr 11 00:59:59.539: PRST-VBL STD Util Set - identical NTPv4_Drift=0.0
Apr 11 00:59:59.539: PRST-VBL DET Cache unlock - ok
Apr 11 00:59:59.539: PRST-VBL API Set - ok return 15
Regards,
Shinu Mathew
11-26-2014 04:43 AM
Hey Shinu,
Looks like you have debugs configured for NTP. Do an #un all in enable mode.
HTH.
Regards,
RS.
11-26-2014 05:34 AM
Hi Rajeev,
Thanks for the quick reply.
Regards,
Shinu Mathew
11-26-2014 06:18 AM
Hi Rajeev,
One more question here.
I have tried to configured NTP on Cisco 3750 switch using following commands.But its not synchronous with my internal NTP server
config#ntp server <Ip address>
Please help on this.
Regards,
Shinu Mathew
11-26-2014 10:25 AM
Hey Shinu,
Try following:
#ntp server <Ip_address> version 2
HTH.
Regards,
RS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide