01-01-2015 02:23 AM - edited 03-07-2019 10:03 PM
STOSCRSW2#delete flash://image-1
Delete flash://image-1? (Y/N)[N] Y
Delete operation is not permitted on file flash://image-1
i wanted to delete this firmware image to upload new one
and also second error is i am getting duplicate ip error
STOSCRSW2#01-Jan-2015 15:48:18 %IPADTBL-N-IPDUPLICATE: Duplicate IP address 192.
168.1.3 from MAC 3c:5e:c3:53:25:99 was detected on VLAN 1, port gi11, aggregated
(6)
Kindly Help me to solve this problem !!
Solved! Go to Solution.
03-25-2015 02:49 AM
image-1 and image-2 files cannot be deleted.
You can see below the SG300 CLI Guide (Page 121)
https://supportforums.cisco.com/sites/default/files/legacy/6/3/7/110736-300%20series%20CLI%20firmware%201.1.pdf
03-25-2015 02:49 AM
image-1 and image-2 files cannot be deleted.
You can see below the SG300 CLI Guide (Page 121)
https://supportforums.cisco.com/sites/default/files/legacy/6/3/7/110736-300%20series%20CLI%20firmware%201.1.pdf
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide