10-12-2006 12:07 PM - edited 03-05-2019 12:13 PM
how to bring back this interface to up status
GigabitEthernet0/2 is down, line protocol is down (notconnect)
10-12-2006 12:44 PM
Connect it something like a switch or PC.
10-12-2006 12:58 PM
what are the other combinations
GigabitEthernet0/2 is down, line protocol is down (notconnect)
GigabitEthernet0/2 is admin down, line protocol is down (diabled)
GigabitEthernet0/2 is down, line protocol is up
GigabitEthernet0/2 is up, line protocol is down
10-12-2006 08:40 PM
1st Combination is when Interface is down
as mentioned you can bring it up by connecting to PC
Second combination is when interface is administrative shutdown using shut command on interface
third option should Interafe is up and line protocol is up
4th combination when line protocol is down
it could be due to keepalive, not matching encapsulation or clockrate
rate if it helps
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide