cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1083
Views
0
Helpful
0
Replies

GLBP Standby is Unknown

nfordhk
Level 1
Level 1

Hi,

 

We are trying to setup GLBP and my standby router is "unknown." Below is our config, any ideas? The virtual IP is indeed working, we are sending traffic to it now. 

 

R1 Device: 2901

IOS: c2900-universalk9-mz.SPA.151-4.M3.bin

!
R2 Device: 2911

IOS: flash0:c2900-universalk9-mz.SPA.154-3.M.bin

 

Router 1

interface GigabitEthernet0/1
 ip address 1.1.1.2 255.255.252.0
 ip flow ingress
 ip flow egress
 glbp 1 ip 1.1.1.1
 glbp 1 priority 110
 glbp 1 preempt
 glbp 1 weighting 5
 glbp 1 load-balancing weighted
 glbp 1 authentication text ****
 glbp 1 weighting track 1 decrement 20
 duplex auto
 speed auto
end

!

GigabitEthernet0/1 - Group 1
  State is Active
    1 state change, last state change 6w0d
  Virtual IP address is 1.1.1.1
  Hello time 3 sec, hold time 10 sec
    Next hello sent in 0.736 secs
  Redirect time 600 sec, forwarder timeout 14400 sec
  Authentication text, string "****"
  Preemption enabled, min delay 0 sec
  Active is local
  Standby is unknown
  Priority 110 (configured)
  Weighting 5 (configured 5), thresholds: lower 1, upper 5
    Track object 1 state Up decrement 20
  Load balancing: weighted
  Group members:
    5057.a84f.2061 (1.1.1.2) local
  There is 1 forwarder (1 active)
  Forwarder 1
    State is Active
      1 state change, last state change 6w0d
    MAC address is 0007.b400.0101 (default)
    Owner ID is 5057.a84f.2061
    Redirection enabled
    Preemption enabled, min delay 30 sec
    Active is local, weighting 5
    Client selection count: 23923948

!

Interface   Grp  Fwd Pri State    Address         Active router   Standby router
Gi0/1       1    -   110 Active        1.1.1.1                  local           unknown
Gi0/1       1    1   -     Active        0007.b400.0101   local           -
------------------------------------------------------------------------------------------------

Router 2

interface GigabitEthernet0/1
 ip address 1.1.1.3 255.255.252.0
 ip flow ingress
 ip flow egress
 glbp 1 ip 1.1.1.1
 glbp 1 preempt
 glbp 1 weighting 5
 glbp 1 load-balancing weighted
 glbp 1 authentication text ****
 glbp 1 weighting track 1 decrement 20
 duplex auto
 speed auto
end

!

GigabitEthernet0/1 - Group 1
  State is Standby
    6 state changes, last state change 2w3d
  Virtual IP address is 1.1.1.1
  Hello time 3 sec, hold time 10 sec
    Next hello sent in 1.984 secs
  Redirect time 600 sec, forwarder timeout 14400 sec
  Authentication text, string "****"
  Preemption enabled, min delay 0 sec
  Active is 1.1.1.2, priority 110 (expires in 11.360 sec)
  Standby is local
  Priority 100 (default)
  Weighting 5 (configured 5), thresholds: lower 1, upper 5
    Track object 1 state Up decrement 20
  Load balancing: weighted
  Group members:
    5057.a84f.2061 (1.1.1.2)
    7c0e.ced3.8d21 (1.1.1.3) local
  There are 2 forwarders (1 active)
  Forwarder 1
    State is Listen
      8 state changes, last state change 1d08h
    MAC address is 0007.b400.0101 (learnt)
    Owner ID is 5057.a84f.2061
    Time to live: 14399.456 sec (maximum 14400 sec)
    Preemption enabled, min delay 30 sec
    Active is 1.1.1.2 (primary), weighting 5 (expires in 10.784 sec)
  Forwarder 2
    State is Active
      3 state changes, last state change 6w0d
    MAC address is 0007.b400.0102 (default)
    Owner ID is 7c0e.ced3.8d21
    Preemption enabled, min delay 30 sec
    Active is local, weighting 5

 

Interface   Grp  Fwd Pri State    Address         Active router   Standby router
Gi0/1       1    -   100 Standby      1.1.1.1          1.1.1.1            local
Gi0/1       1    1   -   Listen   0007.b400.0101    1.1.1.1 -
Gi0/1       1    2   -   Active   0007.b400.0102  local           -

0 Replies 0
Review Cisco Networking for a $25 gift card