10-24-2021 03:40 PM
we are designing a new solution where a C9500-24Y will be deployed and we need to put GLC-SX-MMD and GLC-TE on it,
so is it compatible?
do we need an extra config for it or does the switch auto-sense the plugged GBIC and forwards traffic properly?
10-24-2021 04:08 PM
@mmostafa wrote: we are designing a new solution where a C9500-24Y will be deployed and we need to put GLC-SX-MMD and GLC-TE on it, so is it compatible? do we need an extra config for it or does the switch auto-sense the plugged GBIC and forwards traffic properly?
Yes and no. It will depend entire on what firmware the platform is running now.
10-24-2021 04:10 PM
the C9500 is a new order, not yet delivered, which is the supported firmware?
10-24-2021 05:37 PM
@mmostafa wrote: which is the supported firmware?
which is the supported firmware?
It is not just a matter of "supported firmware".
There is a truck-load of IOS-XE bugs which affects optics.
10-24-2021 08:06 PM
Both optics are supported according to the compatibility matrix. you just need IOS XE 16.9.1 or later.
https://tmgmatrix.cisco.com/?npid=49
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Log in to Community
