GRE tunnel

[jonk34567]

image is attached below. i have configured a tunnel between R1 and R2.if i need to configure a static route on R1 what is the correct command

   R1# ip route 2.2.2.2    255.255.255.255   10.1.1.1

                                                                       or

                                                                    10.1.1.2

[Seb Rupik]

!
ip route 2.2.2.2 255.255.255.255 10.1.1.2
!

Since it doesn't look like you are running a dynamic IGP between the routers you will probably need to install the opposite route in R2:

!
ip route 1.1.1.1 255.255.255.255 10.1.1.1
!

cheers,

Seb.

[Julio E. Moisa]

Hi

As Seb mentioned, or you can set up

Router 1

ip route 2.2.2.2 255.255.255.255 tunnel <tunnel ID>  <--- Local Tunnel 

Router 2

ip route 1.1.1.1 255.255.255.255 tunnel <tunnel ID>  <--- Local Tunnel

[jonk34567]

is it local tunnel id or opposite tunnel id

[Julio E. Moisa · Accepted solution]

Hi

Local tunnel ID.