GUI Web Interface Gone

[charleseichelberger]

Silly question but I just updated my Cisco 891-W's wireless access point to the latest and greatest version. Now when I log onto the AP via HTTP, I get the generic screen like so..

Cisco Systems

Accessing Cisco AP801AGN-A-K9 "TTCAP02"

I can see on the flash: directory under the IOS directory ap801-k9w7-mx.152-2.JB that there is the html directory and underneath that the level/15 directories with all the files in it so I am confident that the IOS upgrade went well but how do I get the web gui back? I tried the "http path" and that did not work. I compared it to another access point and the paths are the same with the exception of the IOS directories, which is to be expected.

So I am officially stumped now and would greatly appreciate any help on the matter as this is driving me crazy.

Thanks

Charles

[jawad-mukhtar]

Have you taken backup of your OLD IOS.

[charleseichelberger]

While that would have been the smart thing to do, no I did not.

[jawad-mukhtar]

Do you have access to console

[charleseichelberger]

Yes. The AP is still working and I can SSH into it.

Charles

[jawad-mukhtar]

Do access AP via https

[charleseichelberger]

Same thing

Cisco Systems

Accessing Cisco AP801AGN-A-K9        "TTCAP02"

[charleseichelberger]

OK. Got it working by flashing a different version (ap801-k9w7-tar.152-2.JA1) to it and following the post at

https://supportforums.cisco.com/docs/DOC-13047

It looks like the version that I had on it, ap801-k9w7-tar.152-2.JB has a bug.

Thanks for the assistance.

Regards,

Charles

[scunning-dcp]

Charles

I am struggling to find any AP801 code that is autonomous  I think W7 in the code name

there is a bug in 124-21a.JA1 that breaks PPTP

and I wonder if you have a link to 12.4(21a)Y or newer as the bug is fixed

But searching all over the support downloads I cannot find any W7 versions  (Stand alone)

only W8 which is LWAPP

thank you in advance

steve