hardware not supported by firmware (Cisco Catalyst 3750g- 48 Poe)

[sunusurendran1]

Hi,

My Name is Sunusurendran. I have one Cisco 3750g 48 POE switch in my office. and it not working because of its ios damaged.

i uploaded new ios using Xmodem, but at the time of booting it showing error

"hardware not supported by firmware. try loading newer software instead. system restarting"

am first time using this. so please , .I uploaded : c3750e-ipbasek-mz.150-2.SE8.bin.

if it can solve with lower release ,please let me know which file release i want to upload

Here included the error message screenshot. may help to clarify the issue.

[amikat]

Hi,

You have downloaded IOS version suitable for the 3750-E range which are different models. For your box you could use e.g. c3750-ipbasek-mz.150-2.SE8.bin instead.

Best regards,

Antonin

[sunusurendran1]

Hi,

Is this  "c3750-ipbasek9-mz.150-2.SE8.bin"  ?. i can't find "ipbasek-mz". In Downloads it showing only "ipbasek9-mz"

is "c3750-ipbasek9-mz.150-2.SE8.bin" will work?

thanks amikat..

[amikat]

Hi,

Yes, that is what I have meant, sorry about my typing error.

Best regards,

Antonin

[sunusurendran1]

Hi,

its ok Antonin..am fist time up loading IOS, and also no more knowhow about these things.

Actually i uploaded c3750-ipbasek9-mz.122-35.SE5.bin. and its working fine.

but am going to upload : c3750-ipbasek9-mz.150-2.SE8.bin

Thanks Antonin for your support