03-06-2018 06:42 PM - edited 03-08-2019 02:09 PM
I created below model. it was configured basically. now, i want to route a packet from Com 1 to Com 4 go through MSwitch 2. It means the path: Com 1 -> MSwitch 0 -> MSwitch 2 -> MSwitch 1 -> Com 4. Now, I have configured RIP method to all MSwitch and the path actually is(I used TRACERT command): Com 1 -> MSwitch 0 -> MSwitch 1 -> Com 4.
much appreciate!
p/s: Sorry my eng isnt clear
03-07-2018 05:43 AM
03-07-2018 06:50 PM
@Joseph W. Doherty thanks for reply! Now i want to connect other network (Ex: 1.1.7.0) to MSwitch 0. I want this network still get through path: 1.1.7.0 -> MS0 -> MS1->Com4. and Net 1.1.1.0: MS0 ->MS2 ->MS1->Com 4.
If i use Com 3 as a Proxy Server and set Com 1 to use this Proxy, It's ok?
03-08-2018 04:02 AM
03-12-2018 12:07 AM
@Joseph W. Doherty you mean Clients and Proxy Server must to be in the same network?
03-12-2018 12:21 PM
03-12-2018 06:26 PM
@Joseph W. Doherty i use proxy server in other country that i believe it's Network is different from my Network, it still run correct. why is that?
03-13-2018 04:24 AM
03-14-2018 02:34 AM
@Joseph W. Doherty i created a model. Clients, Server and Peer0 are connected to each other(ping ok). now i want Clients to use a Proxy server to change their IP into Server's IP. ex: 1.1.3.x -> 1.1.1.x.
Where should i set up Proxy server?
03-14-2018 05:31 AM
03-14-2018 08:08 AM - edited 03-14-2018 08:13 AM
@Joseph W. Doherty Peer0 is a external network. i want Clients to be connected to this network via a Proxy server. and Output IP of Proxy Ssrver will be kind of 1.1.1.x or 1.1.2.x as the Server's IP. Where should i put that Proxy server at? Sorry my english is so bad.
03-14-2018 08:30 AM
03-14-2018 06:35 PM
@Joseph W. Doherty my knowledge about Proxy is so vague. according to my knowledge, Proxy must have 2 IP at least (input and output). I want clients to connect to Peer0 via Proxy that have output IP is 1.1.1.x or 1.1.2.x
03-15-2018 03:08 AM
04-01-2018 06:47 PM - edited 04-01-2018 06:47 PM
@Joseph W. Doherty sorry for my late reply. i am on another duty now. thanks for your support!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide