02-26-2013 09:45 PM - edited 03-07-2019 11:57 AM
Hi all,
i have an issue that our device processing Switching Process (SP) is high by "Collection Process"
Does anyone have any info about this process?
Does anyone have any experience about this process or what causing it?
remote command switch sh proc cp sort
CPU utilization for five seconds: 99%/1%; one minute: 91%; five minutes: 86%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
467 78871748 1052935 74907 77.27% 73.09% 67.80% 0 Collection proce
211 3900352 599384 6507 12.23% 4.22% 3.41% 0 CFIB LC Main Tas
311 1737732 81660 21280 1.91% 0.75% 1.18% 0 XDR receive
197 1954312 55063 35492 1.75% 1.65% 1.66% 0 Vlan Statistics
sh platform hardware capacity cp
CPU Resources
CPU utilization: Module 5 seconds 1 minute 5 minutes
1 0% / 0% 1% 1%
2 99% / 49% 85% 77%
5 RP 37% / 0% 19% 17%
5 SP 99% / 0% 85% 82%
6 RP 11% / 2% 36% 36%
6 SP 99% / 0% 87% 86%
7 100% / 53% 85% 77%
8 100% / 35% 85% 79%
9 100% / 53% 85% 78%
Thanks all
02-27-2013 07:55 AM
Whic Platform / IOS Version you have.
Have you enable netflow collector?
02-27-2013 11:42 AM
Hi Jawad
Platform CISCO7609-S using IOS 15.2(4)S2, i'm not enable netflow collector.
Do you have any idea?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide