High CPU Switching Process (SP) due to Collection Process

[Joejohn]

Hi all,

i have an issue that our device processing Switching Process (SP) is high by "Collection Process"

Does anyone have any info about this process?

Does anyone have any experience about this process or what causing it?

remote command switch sh proc cp sort

CPU utilization for five seconds: 99%/1%; one minute: 91%; five minutes: 86%

PID Runtime(ms)     Invoked      uSecs   5Sec   1Min   5Min TTY Process

467    78871748     1052935      74907 77.27% 73.09% 67.80%   0 Collection proce

211     3900352      599384       6507 12.23%  4.22%  3.41%   0 CFIB LC Main Tas

311     1737732       81660      21280  1.91%  0.75%  1.18%   0 XDR receive     

197     1954312       55063      35492  1.75%  1.65%  1.66%   0 Vlan Statistics 

sh platform hardware capacity cp

CPU Resources

CPU utilization: Module             5 seconds       1 minute       5 minutes

                   1                   0% /  0%             1%              1%

                   2                  99% / 49%            85%             77%

                   5  RP              37% /  0%            19%             17%

                  5  SP              99% /  0%            85%             82%

                   6  RP              11% /  2%            36%             36%

                  6  SP              99% /  0%            87%             86%

                   7                 100% / 53%            85%             77%

                   8                 100% / 35%            85%             79%

                   9                 100% / 53%            85%             78%

Thanks all

[jawad-mukhtar]

Whic Platform / IOS Version you have.

Have you enable netflow collector?

[Joejohn]

Hi Jawad

Platform CISCO7609-S using IOS 15.2(4)S2, i'm not enable netflow collector.

Do you have any idea?