Dear Friends,
We have a 6509 VSS running 12.2(33)SXI4. We got high mem usage alert from CS-MARS for that (indicating memory utilization is more than 90%). Looking at sh memory, i see that we have enough free mem (more than 60% available). However, looking at the output of show platform hardware capacity cpu, we see that utlilization has gone realy high. Please find below the captures of show memory and show platform hardware capacity cpu.
sh memory
System Memory: 1048576K total, 393469K used, 655107K free, 1000K kernel reserved
Lowest(b) : 670699520
show platform hardware capacity cpu
CPU Resources
CPU utilization: Sw/Mod 5 seconds 1 minute 5 minutes
1/1 0% / 1% 0% 0%
1/2 2% / 1% 0% 0%
1/3 2% / 2% 4% 4%
1/5 RP 1% / 9% 1% 1%
1/5 SP 12% / 6% 6% 6%
2/1 0% / 1% 0% 0%
2/2 0% / 1% 0% 0%
2/3 15% / 6% 5% 4%
2/5 RP 2% / 1% 0% 0%
2/5 SP 4% / 9% 5% 5%
Processor memory: Sw/Mod Bytes: Total Used %Used
1/1 268435456 222449664 83%
1/2 268435456 222404608 83%
1/3 1073741824 258412544 24%
1/5 RP 1073741824 402911232 38%
1/5 SP 1073741824 478400512 45%
2/1 268435456 222490624 83%
2/2 268435456 222445568 83%
2/3 1073741824 258416640 24%
2/5 RP 1073741824 397701120 37%
2/5 SP 1073741824 478404608 45%
I/O memory: Sw/Mod Bytes: Total Used %Used
1/1 8126344 7886544 97%
1/2 8126344 7886544 97%
1/3 11796240 11442472 97%
1/5 RP 12058384 10715832 89%
1/5 SP 8388608 8104304 97%
2/1 8126344 7886544 97%
2/2 8126344 7886544 97%
2/3 11796240 11442472 97%
2/5 RP 12058384 10715832 89%
2/5 SP 8388608 8104304 97%
Output Interpreter is unable to understand this output. Does anyone give some pointers on this? Thanks a lot
Thanks a lot
Gautam
