High process memory cisco 6509

[samarjitdas]

Can someone tell me which process is consuming high memory with my c6509 switch. File attached for ref.

[samarjitdas]

Hi Nik

After applying the command recommended by you, immediately line card CPU utilization fell down to 10% and it was continued with 10 - 15 % CPU utilization for appx. 1 hr. But after 1 hr , again it has started going high and reached 100%.

[nkarpysh · Accepted solution]

Hi Samarjit,

So smth is wrong with registers - we forced those to crrect values and saw problem gone for a while. Then they failed back to incorrect once. I would try to physically reseat the card and see if it helps. Otherwise it can be HW problem or a new DDTS - then you'll need to open a TAC case to deeg it deeper.

Nik

[samarjitdas]

Hi Nik

I have changed the line card hardware and now the problem stands resolved. Anyway thank you very much for your all efforts towards my case.