cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
645
Views
0
Helpful
3
Replies

Hosted Voice/VOIP

Senbonzakura
Level 1
Level 1

When dealing with Hosted Voice and VOIP phones connected to your Switches and Firewalls, what are some settings you'd recommend for an ideal environment? For example, what I notice the most is boradcast storm level 10 along with being attached to vlans. Is there any type of setting these VLANS should have, also should the phones have Portfast Edge configured on their ports as well? Give you me your full thoughts.

1 Accepted Solution

Accepted Solutions

And put the phones in a separate vlan/subnet. That is all I can think of.

Good Luck!

View solution in original post

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Port fast feature is autonomously enable when you configure a voice vlan. As for the storm-control feature configuration, if your interfaces are gig to the phones, level 1.00 should be sufficient.

 

storm-control broadcast include multicast
storm-control broadcast level 1.00

 

HTH

Thank you for doing that, is there anything else you'd recommend?

And put the phones in a separate vlan/subnet. That is all I can think of.

Good Luck!

Review Cisco Networking for a $25 gift card