Hi,
We recently purchased a C3750-X-12S-E device. I am having a brutal time trying to configure it. I've tried:
1. The web interface. Using IE9 on a Windows7 device, the web interface allows me to login, but doesn't load properly. By that I mean, I'll click on something in the left menu and it doesn't fully come up in the right-side pane. Basically rendering it unusable. It did allow me to do Express Setup, but that was about it.
2. The Cisco Network Assitant. When I try to bring it up in CNA (v5.6.3), the device shows as unsupported. A quick check of the Release Notes for CNA shows that it is not listed as one of the supported models of 3750-X device as you can see below:
"Catalyst 3750-X switches (WS-C3750X-24T-L, WS-C3750X-48T-L, WS-C3750X-24P-L, WS-C3750X-48P-L, WS-C3750X-48PF-L, WS-C3750X-24T-S, WS-C3750X-48T-S, WS-C3750X-24P-S, WS-C3750X-48P-S, and WS-C3750X-48PF-S)"
3. When I try to SSH to the device for CLI access, i cannot seem to get on to configure it. I enabled Telnet via the web interface (one of the few things it allowed me to do), but I still cannot telnet either. I tried SSH'ing and it prompted me for login, but I coulnd't get on, using the password I setup in Express Setup. I tried a variety of usernames but no luck.
Probably the best bet is the CLI via console it would seem (although being relatively new to the CiscoIOS, I was hoping for some gui configuration tools!).
Any help is appreciated.
