04-02-2014 08:20 AM - edited 03-07-2019 06:57 PM
Hello, I have four 2521 routers and three 2954 switches. I connected my ISPs modem from the ethernet port and plugged it into port 24 of one of my switches. I also configured the switch for VTY access and gave it a login password. I would like to log into the switch to configure it and telnet into all the other devices from a remote location. But I am unable to ping the public address assigned to me by my ISP. So I can't even telnet to the switch. Help
04-13-2014 10:43 AM
Hi djchitown,
When physically access the 2521 router you below test:
1. Ping to 8.8.8.8
2. Telnet to internal pc
3. You must be configure Enable password.
Before you telnet from remote location first you check the ping test then you telnet.
I hope it could help you
Regards
Parosh
07-07-2015 10:59 AM
This discussion has been reposted to the LAN, Switching and Routing community.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide