How do I test port 49 (TACACS) availability from the Cisco Router
Good day to all and hope you doing fine.
I'm configuring TACACS to my router. However, between router and tacacs server there is a firewall in the middle who was manage the port and ip restriction management.
Router <====> Firewall <====> TACACS Server.
My question, how can i test the port availability of TACACS server (TCP 49) is already open by the firewall before i make configuration ?Where i can confirm the port 49 on the TACACS server IP was succesfully open. Therefore i can start configure the TACACS configuration inside the router.
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.