Hi Gp,
Thanks for your input.We decided to have all devices on one subnet 192.168.7.0.All servers and clients are located in the same site (LAN).Our database and image servers ip addresses are 192.168.7.5 and 192.168.7.6 respectively.We've just added new T1 line to SECOND Serical inferface (WIC#2).We'd like to dedicate this T1 bandwidth to these two servers.
they are accessed by local users and remote branch users. here is the 2621xm router config:
Can I use IP CEF Load-sharing per-destination command to allocate the new T1 bandwidth for ONLY Database and image SERVERS. The orther T1 is utilized by the rest of LAN users? Do i need to add any other command to make it work?
Thanks,
OPS#sh run
Building configuration...
Current configuration : 1578 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname OPS
!
boot-start-marker
boot-end-marker
enable secret xxx
enable password xxx
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
!
no ftp-server write-enable
!
class-map match-any VOIP
match ip dscp ef
!
!
policy-map VOIP-QOS
class VOIP
priority 1158
class class-default
fair-queue
random-detect dscp-based
interface FastEthernet0/0
ip address 192.168.157.1 255.255.255.0 secondary
ip address 192.168.7.1 255.255.255.0
speed auto
full-duplex
no mop enabled
!
interface Serial0/0
ip unnumbered FastEthernet0/0
service-policy output VOIP-QOS
no ip mroute-cache
!
interface Serial0/1
ip unnumbered FastEthernet0/0
service-policy output VOIP-QOS
no ip mroute-cache
!
router eigrp 15
network 192.168.1.0
network 192.168.2.0
network 192.168.3.0
network 192.168.4.0
network 192.168.5.0
network 192.168.6.0
network 192.168.7.0
network 192.168.8.0
network 192.168.151.0
network 192.168.152.0
network 192.168.153.0
network 192.168.154.0
network 192.168.155.0
network 192.168.156.0
network 192.168.157.0
network 192.168.158.0
no auto-summary
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.5
ip http server
!
dialer-list 1 protocol ip permit
!
line con 0
line aux 0
line vty 0 4
password xxx
login
end
OPS#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IPBASE-M), Version 12.3(6e), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 01-Apr-05 03:01 by hqluong
Image text-base: 0x80008098, data-base: 0x80ED1544
ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-IPBASE-M), Version 12.3(6e), RELEASE SOFTWARE (fc3)
OPS uptime is 1 hour, 54 minutes
System returned to ROM by power-on
System image file is "flash:c2600-ipbase-mz.123-6e.bin"
cisco 2620XM (MPC860P) processor (revision 0x401) with 126976K/4096K bytes of memory.
Processor board ID FTX0926A1DJ (3720557725)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
