10-11-2012 03:39 AM - edited 03-07-2019 09:24 AM
hi ,
i
want to ask ,
can we use prefix list with ip policy ??
assume i have the subnet
172.16.1.0/24
&
i have the subnet
172.16.2.0/24
if i want subnet 1 to go to gateway1 , and subnet 2 go to gateway 2
i tried to use ACL and it is ok, ===>no poroblems
but i tried to use prefix list , but it didnt succed ,
my question is , can i use prefix list into ip policy route map ??
or in this case i must use ACL ??
regards
Router==========SW========Gateway1
|
|
Gateway2
regards
Solved! Go to Solution.
10-11-2012 03:50 AM
Hi,
prefix-lists are only used for redistribution, route-filtering or BGP but not for PBR.
Regards.
Alain
Don't forget to rate helpful posts.
10-11-2012 03:50 AM
Hi,
prefix-lists are only used for redistribution, route-filtering or BGP but not for PBR.
Regards.
Alain
Don't forget to rate helpful posts.
10-11-2012 04:44 AM
hi ,
do u mean that prefix list macth routes only ???
just to assure my info
regards
10-11-2012 05:07 AM
Hi,
yes exactly.
Regards.
Alain
Don't forget to rate helpful posts.
10-11-2012 05:50 AM
hi , thanks for ur reply .
regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: