05-18-2015 07:38 PM - edited 03-08-2019 12:03 AM
Dear all,
i have cisco switch 3850 2 units and 3560 2 unit all of them connect by UTP cable and from 3850 to 3850 using stacking cable.
do you know how to configure from 3850 2 units to 3560 2 units? which command that we use ?
Please see diagram as in the attach file.
Best Regards,
Rechard
05-22-2015 02:19 AM
They will be L2 Trunk links and spanning tree will shut down one of each of the links from the 3560.
05-22-2015 02:20 AM
Dear Vivek,
For your link L3 connect to L2 is ok.
but on my diagram L3 to L3 mean 3850 to 3560, do you know which command that i can use loadsharing and combine speed link 3850 to 3560.
Note : i have 3850 (2 units) with Stack
i have 3560 (2units) that link to both 3850.
if all of you have command or configuration please share me !!!!!!
Best Regards,
rechard
05-29-2015 06:23 PM
A post in this discussion has been removed due to possible misconduct. Please refer to the CSC terms of use for more details.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide