How to create VLANs in the WebUI for 3750X?

[Inxsible]

I have a cisco 3750X switch and i upgraded it to the latest IOS : 15.2(4)E10)

I set up the switch IP address and now am presented with the WebUI below:

Cisco 3750X WebUI

How would I go about creating and managing VLANs in the WebUI? Did I install the wrong IOS?

Thanks for your help in advance !!

[pieterh]

have not done this on 3750X models, but I have some suggestions to check

- first try the configure -> port settings

   I guess you'' find an option to modify the port to trunk mode and create vlans there

- evenso click on a port in the  status-image, a window may pop-up

- last:  for more advanced configuration start network assistant

[Inxsible]

Thanks for your reply @pieterh .

The Configure -> Port Settings simply allows setting the Speed, Duplex and POE for each port.

1. Speed is an option between Auto, 10, 100 & 1000
2. Duplex options are Auto, Full & Half.
3. POE options are Auto & Never

On the status image, when hovering over a port, it just gives general info -- description, Status and whether POE is on or off. No pop up window when clicking on it.

Network Assistant is a Windows & Mac only option. I have neither in my network and wouldn't want to buy/maintain one just to maintain a switch.

Seems like CLI is the only way to do it. I wonder why they even have a WebUI interface for the 3750X