How to Enable Poe function in WS-2960S-24-PSL

[thuthu90911]

Hi all

                      Please kindly answer to me ,  how to configure Poe enable in 2960s-24psl , i am a new guy . can u please detail answer me how to configuration in to the switch. 

So Many Thanks

[Georg Pauwen]

Hello,

the PoE ports are enabled by default and set to 'auto', which means the port automatically detects connected devices that are not powered, and supplies the power.

You can change the 'auto' mode by using the 'power inline' interface command:

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_44_se/configuration/note/ol14988.html#wp1028704

[thuthu90911]

Thanks you gpauwen :)

[Tausif Gaddi]

You dont need to enable PoE, please refer

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/hardware/installation/guide_stack/2960SHIG/HIGOVERV.html