Hi, I am setting up layer 3 switching for AT&T Network on Demand. I have a 3650. I have made an EVC in the AT&T Cloud for 200Mb speed. In the little documentation I have it says i need to shape the bandwidth of the interface to match. It is curre...
Hi, I am setting up layer 3 switching for AT&T Network on Demand. I have a 3650. I have made an EVC in the AT&T Cloud for 200Mb speed. In the little documentation I have it says i need to shape the bandwidth of the interface to match. It is curre...
Hi, We are trying to find out the MTBF of Cisco Nexus 5548 switches and 5525-X ASA firewalls (with both IPS and with FirePower). I can find info on old Cisco switches but none for any recent models. Thanks
I'm used to the 2900 ISR and Modular QOS. I'm looking to transpose something similar to what I have done in the past. I have a PSTN router connected to my Nexus 5k and a VM host running CUCM connected to the same Nexus 5k. Is there any basic templat...
Can you copy Catalyst 3850 IOS to an SD card in a 4507R+E Sup 8? I need to upgrade a 3850 that is not on the network and since 3850's dont have SD cards I want to know if I can copy the 3850 IOS to a 4507 that is on the network. With out tight secu...
We are having one of the line card WS-X4748-12X48U+E in Cisco WS-C4507R+E. Network connectivity of desktops specially "Lenovo M73" connecting on multi gig port from 1 to 12 are not coming up..while the same desktop is working on other gig port from 1...
Hi, we have configured vlans on several sf 200-24 switches. Ports 1-11 are set to vlan id two and configured as access ports. ports 13-23 are set to vlan id 3 and also configured as access ports. ports 12, 24, G1 and G2 are set to vlan id 1 and rema...
Hi, Could someone advise what switch port config to be put on for avaya phone connection to 3650, 3850 switches? how to trust dscp from avaya phones?
Hi Everyone, Which exam is equivalent to CCIP 642-642 QOS? as this has expired in 2012. Actually, I have implemented QoS over all the Switches and Routers and thinking might as well get the certification done :) Regards, B
I am a volunteer at a small non-profit. We want to establish a network that provides staff with wired and wireless access and guest wireless access. The equipment currently in place is a DSL modem, a Cisco SG200-18 and four Cisco WAP121 wireless acc...
Hi community i need some confirmation regarding the "ip igmp snooping tcn flood" command" According to the documentation: "With the no ip igmp snooping tcn flood command, you can disable multicast flooding on a switch interface following a topology c...
Hi guys... Im my network on old 2950 switch i have configured a DHCP server with perminant dhcp binding based on the client hardware address. Some of these devices "ip" are not used any more due to client device nit used im y network any more. Is the...
How to find Cisco best practice CVD for given platform? what's recommended config for scheduling, queuing? is it recommended to leave scheduling, queuing to default value?
Will there be any problems if cables in etherchannel have different categories? In my case it's cat. 6 and cat. 5e.
Cisco Switch SF300-24PP how can I configure VTP mode on it.
We continue to receive this syslog message, and since it is labeled as critical - it seems important. Critical level syslog message %USER-2-SYSTEM_MSG: fatal: Write failed: Broken pipe. Client is 10.xxx.xxx.xxx,length of packet causing error 52 52 ...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
09-03-2024 09:19 AM | ||
09-03-2024 06:59 AM | ||
09-03-2024 12:56 AM | ||
08-28-2024 02:25 AM | ||
08-20-2024 09:12 AM |
User | Count |
---|---|
8 | |
6 | |
6 | |
5 | |
5 |