07-21-2021 02:45 AM - edited 07-21-2021 03:04 AM
Hi all,
I have a pair of cisco 9300 which were setup by a 3rd party and i need to create a new Vlan and want to create a new HSRP stanby IP, but to create the stanby IP i need to set the HSRP version when configuring the vlan, but i dont know if it's version 1 or 2
I looked at the running config of the switch and reviewed the configurations of the existing vlans with HSRP standby IP, but i couldn't determine if it's version 1 or 2.
how do i determine which version of HSRP is currently being used on the existing vlans with standby IP's ?
I am using Version 16.9.01 and have Network-Advantage license
Cheers,
Richard.
Solved! Go to Solution.
07-21-2021 03:05 AM - edited 07-21-2021 03:05 AM
Hello
you can tell by the the vip mac addreesses assigned to the hsrp group
Sh standby
0000.0c07.acXX (v1 default)
0000.0c9f.f0XX (v2 default)
07-21-2021 03:05 AM - edited 07-21-2021 03:05 AM
Hello
you can tell by the the vip mac addreesses assigned to the hsrp group
Sh standby
0000.0c07.acXX (v1 default)
0000.0c9f.f0XX (v2 default)
07-21-2021 03:18 AM
Hi Paul,
Many thanks for the quick reply - I was going to raise a proper support ticket, but not sure if they cover general configuration enquiries. So looking at the output of the Sh Standby i can see there appears to be associated HSRP group names associated with the HSRP group numbers.
but in cisco's documentation it only mentions the HSRP group number and not the group name. How do you assign a HSRP Group name ?
07-21-2021 05:25 AM
Hello
@ribuck wrote:
but in cisco's documentation it only mentions the HSRP group number and not the group name. How do you assign a HSRP Group name
standby <group number> name <name>
int x/x < hsrp ver1)
standby 50 name stan
int y/y < hsrp ver2)
stanby ver 2
standby 100 name fred
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide