10-06-2008 05:32 AM - edited 03-06-2019 01:46 AM
Hi
Following is the output of sh ver of cisco 2621 router. There is two place saying about the memory
---
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
---
another
---
32K bytes of non-volatile configuration memory.
what is the actual memory size? is it 64 or 32?
Can i install an IOS which minimum requires 64Mb memory in this Router?
#sh ver
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memor
y.
Processor board ID JAD05440L9D (3776779414)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
10-06-2008 06:46 AM
You have:-
32Kbs non-volatile memory, where the config is kept.
16mbs of flash - depends on the IOS image size to be stored.
64mbs of memory to run the IOS.
So yes - you could run an image that requires a min of 64mbs.
HTH>
10-09-2008 04:08 PM
In addition to Andrew info..
How to know the memory ?
cisco 2621 (MPC860) processor (revision 0x600) with 53248K/12288K bytes of memory.
when you get the above output from sh ver,
simply add 53248k + 12288k and always devide by 1024.
e.i
53248k + 12288k / 1024 = 64
64MB is your total memory in your router
Rgds
Jorge
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide