How to monitor Cisco Hardware on solarwinds

[pushpendra_y]

Hi Team,

How to setup monitoring on Cisco Switches for hardware health check(like if fan fails, temp goes high) and then how to monitor it via solarwinds.

Please assit

[Traian Bratescu]

Hi,

There is a built-in monitor... " Hardware Health Sensors"

You can choose which ones you one to be monitored:

Fan

Fan 1Normal

Fan 2Normal

Fan 3Normal

Fan 4Normal

Fan TrayNormal

Power Supply

1.2V voltage in mVNormal1.207 V

1.8V voltage in mVNormal1.83 V

12V voltage in mVNormal12.592 V

2.5V voltage in mVNormal2.505 V

3.3V voltage in mVNormal3.322 V

5V voltage in mVNormal5.173 V

ASIC voltage in mVNormal1.049 V

C2921/C2951 AC-POE Power SupplyNormal

CPU Core voltage in mVNormal1.226 V

Temperature

CPUNormal58 °C

Exhaust LeftNormal39 °C

Exhaust RightNormal38 °C

Intake LeftNormal36 °C

Intake RightNormal34 °C

Power SupplyNormal47 °C

Traian

[Patrick Callum]

Hello

How I do it is by enabling SNMP on the device, in SW go to add node enter the hostname or IP choose Most Devices: SNMP and ICMP enter your strings click next and select the resources you wish to monitor, you can get very granular from the device health to your interfaces or even by layer.