How to setup a VLAN on a Cisco Stack

[Kyndall Taylor]

I have 3 3750's in a stack config. I can see Gi1/0/1 - Gi3/0/48 in the console and through the web interface. If I do show vlan it shows VLAN1 and shows included ports on all three switches 1/0/1 - 3/0/48. I  try to setup a vlan331 on Switch 1 port 17 - Switch 3 port 48

config t

int vlan331

interface range Gi1/0/17-3/0/48  OR interface range Gi1/0/17-Gi3/0/48 --barks at the 3/0/48. It does let me do a test like interface range Gi1/0/17-18. That works..

How can I include the other ports on the other two switches which are stacked into this one VLAN331?

[Joseph W. Doherty · Accepted solution]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

int range g1/0/17 - 48 , g2/0/1 - 48 , g3/0/1 - 48

[Kyndall Taylor]

Thanks. Worked great.