12-06-2011 08:28 AM - edited 03-07-2019 03:46 AM
hi:
i have a simple frame-relay setup as shown in the picture below
each private address is nat translated. i can visit the server by using its global ip address but i could not use its named address.
all devices are linked ok,
the PC1 side router config are:
ip dhcp pool field_office
network 192.168.1.0 255.255.255.0
default-router 192.168.1.254
dns-server10.10.10.10
!
!
!
!
!
!
!
ip name-server 10.10.10.10
what else should i do to , it seems like pc1 could not resolve dns. shall i place another dns ????
any helps?
best regards.
Solved! Go to Solution.
12-06-2011 08:55 AM
Hi,
can you contact pc2 by name ?
Regards.
Alain
12-06-2011 08:55 AM
Hi,
can you contact pc2 by name ?
Regards.
Alain
12-07-2011 08:54 PM
thanks cadet, i have resoloved the problem, it seems i mis-configured somthing on the NAT.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: