07-05-2012 12:04 PM - edited 03-07-2019 07:37 AM
Hi there,
I have an C4900M with twingig converter and SFP GLC-LX-SMD in. So the SFP supports DOM function. It is running on 12.2(53)SG2.
I would to the see the optical power level of the SFP, but it does not recognize 'show interface transceiver' command as showed in 4500 software guide. Any one know what else command to check the power level?
Thanks,
07-05-2012 03:12 PM
sh interface
07-05-2012 06:10 PM
The command is not accepted by 4900M.
07-06-2012 12:05 AM
Check if the transceiver monitoring is enabled. The command to enable it is "transceiver type all
".
Kind Regards,
Ivan
**Please grade this post if you find it useful.
07-06-2012 05:17 AM
And if it still does not work, try with 12.2(54)SG as 12.2(53)SG3 had changes in DOM support.
Kind Regards,
Ivan
**Please grade this post if you find it useful.
11-21-2014 06:53 AM
Did anyone figure this out? I would love to have this command on the 4900M as well.
07-06-2012 11:58 AM
Tried upgrade to 12.2(54)SG but same issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide