Solved: How to Tag Native Vlan?

tim.zhao · ‎07-29-2019

Hi everyone,

I have a C2960x running 15.2(2)E7 .

I know in the pass version using command "vlan dot1q tag native" or "switchport trunk native vlan tag" to tag native vlan.

But I can't find such command in version 15.x

C2960X(config)#vlan ?
WORD ISL VLAN IDs 1-4094
access-map Create vlan access-map or enter vlan access-map command mode
configuration vlan feature configuration mode
filter Apply a VLAN Map
group Create a vlan group
internal internal VLAN

C2960X(config-if)#switchport trunk native vlan 1 ?
<cr>

C2960X(config-if)#switchport trunk native vlan ?
<1-4094> VLAN ID of the native VLAN when this port is in trunking mode

So how can I tag the native vlan in version 15.x?

Thank you for any answers.

Best Regards,

Tim

marce1000 · ‎07-29-2019

- The command is not supported on switched using the LAN base feature set.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

View solution in original post

marce1000 · ‎07-29-2019

- The command is not supported on switched using the LAN base feature set.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '