11-18-2014 01:16 AM - edited 03-07-2019 09:32 PM
Hello All,
I want to know the procedure to upgrade the image from usb to 6506 switch.
Solved! Go to Solution.
11-18-2014 02:00 AM
I want to know the procedure to upgrade the image from usb to 6506 switch.
Depends on your supervisor card.
The only supervisor card that supports USB is Sup2T.
11-18-2014 02:00 AM
I want to know the procedure to upgrade the image from usb to 6506 switch.
Depends on your supervisor card.
The only supervisor card that supports USB is Sup2T.
11-18-2014 06:07 AM
Hi Leo,
I have sup 2T.
I have upgraded the image by connecting it in the network. But Please tell me the procedure and commands for future reference.
Also one doubt, I have configured vsl link between two 6506 switch. One switch is showing portchannel as up and other switch is showing portchannel as waiting to be aggregated mode.
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
255 Po255(RD) - Te1/2/7(w) Te1/3/7(w)
Is this a weird behaviour or everything is fine.
11-18-2014 12:39 PM
Copying the IOS from the USB to your supervisor is straight-forward. The command is: copy usbflash:<IOS_filename.bin> sup-bootflash:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide