cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

7771
Views
0
Helpful
2
Replies
Contributor

How to view logs on Cisco 7600 router

HI everybody

I need to chcek the logs for a  customer  for a particular inteface ( it flapped but need to find out when and thus my  serach for logs)

Our platform is

Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1(3)S5, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2013 by Cisco Systems, Inc.

Compiled Tue 12-Feb-13 13:17 by prod_rel_team

ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)

BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp

thanks

2 ACCEPTED SOLUTIONS

Accepted Solutions
VIP Expert

Re: How to view logs on Cisco 7600 router

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

It depends on device configuration.  If device is configured for local syslogging, show log should show log contents.

If device is configured to send to an external syslog, you should be able to see log entries there.

View solution in original post

Highlighted
Beginner

How to view logs on Cisco 7600 router

Hi,

I guess you are looking for the command to see the event into syslog.

"This example shows how to enable the system logging of the interface state-change events on all interfaces in the system:

Router(config)# logging event link-status default

"

--

Dmitry

View solution in original post

2 REPLIES 2
VIP Expert

Re: How to view logs on Cisco 7600 router

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

It depends on device configuration.  If device is configured for local syslogging, show log should show log contents.

If device is configured to send to an external syslog, you should be able to see log entries there.

View solution in original post

Highlighted
Beginner

How to view logs on Cisco 7600 router

Hi,

I guess you are looking for the command to see the event into syslog.

"This example shows how to enable the system logging of the interface state-change events on all interfaces in the system:

Router(config)# logging event link-status default

"

--

Dmitry

View solution in original post

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards