05-27-2015 01:22 AM - edited 03-08-2019 12:11 AM
Folks,
How best can I compare a Cisco "WS-C4507R+E" versus a "WS-C4507R-E" chassis? I understand that the SUP 8E is not supported in the later model and there are some per slot bandwidth upgrades.
Is there anything else that should provoke me to look at upgrade options?
Thanks,
N.
Solved! Go to Solution.
05-27-2015 03:03 AM
The difference between the two is the Line Card Backplane Speed. Go HERE.
05-27-2015 03:03 AM
The difference between the two is the Line Card Backplane Speed. Go HERE.
06-08-2015 12:02 AM
Just for your information guys, SUP-8E is supported on Chassis "WS-C4507R-E"
It was in the road map from cisco and now it is supported.
Just issue the "Show Inventory" command and see the Chassis VID.
If it is 2.0 or higher then SUP-8E is supported
you can find it in the below link
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/configuration/notes/OL_29676.html
Please do rate it if you find it helpful
Thanks.
Cheers
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide