08-10-2007 09:08 AM - edited 03-05-2019 05:50 PM
Hi,
We have two css 11500 series , we need to configure in HSRP mode. So that if one fails second will automatically take over. Like PIX is it required to be configured like active and failover mode with stateful or stateless mode of failover. Do we need seperate licenses for such configuration similar to PIX.
( In our case VIP adress and server IP address are on the same Subnet , source and Dest NAT is done using server groups in CSS).
Any link on cisco.com or working example configuration guidelines are highly appreciable.
Thanx in advance
Subodh
08-10-2007 12:10 PM
CSS supports VRRP for redundancy.
Here is a link to Redundancy Config guide:
Thanks.
05-29-2009 10:18 AM
Here is the URL for the configuration for the Configuring VIP and Virtual IP Interface Redundancy follow the configuration guide which may help you
Configuring Box to box redundancy:
CSS 11500 Active-Active Stateful Failover ASR in One-Armed Mode Configuration Example
Box-to-Box Redundancy on the CSS 11xxx Configuration Example - Ciscowiki
Kindly find full range of configuration examples on CSS here :
Cisco CSS 11500 Series Content Services Switches
Configuration Examples and TechNotes
http://www.cisco.com/en/US/products/hw/contnetw/ps792/prod_configuration_examples_list.html
Cisco CSS 11500 Series Content Services Switches
Kindly see URL given below for my other articles
If possible plz rate sothat I can be helpful to other people also as it will enhance my credibility.
Sachinga.hcl
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide