05-19-2015 04:24 PM - edited 03-08-2019 12:04 AM
Hi, I'm wondering why the sh standy output is different in the tracking section... any guess? Both switches are using 12.2(44)SE5 IOS.
Node1
track 1 interface Vlan301 line-protocol
interface Vlan301
ip address 10.10.253.253 255.255.255.0
ip helper-address 10.10.254.24
ip helper-address 10.10.254.25
standby 10 ip 10.10.253.254
standby 10 priority 205
standby 10 preempt
standby 10 track 1 decrement 10
sh standby:
Vlan301 - Group 10
State is Active
264 state changes, last state change 00:38:05
Virtual IP address is 10.10.253.254
Active virtual MAC address is 0000.0c07.ac0a
Local virtual MAC address is 0000.0c07.ac0a (v1 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 1.232 secs
Preemption enabled
Active router is local
Standby router is 10.10.253.252, priority 200 (expires in 8.064 sec)
Priority 205 (configured 205)
Track interface Vlan301 state Up decrement 10
Group name is "hsrp-Vl301-10" (default)
Node2
track 1 interface Vlan301 line-protocol
interface Vlan301
ip address 10.10.253.252 255.255.255.0
ip helper-address 10.10.254.24
ip helper-address 10.10.254.25
standby 10 ip 10.10.253.254
standby 10 priority 200
standby 10 preempt
standby 10 track 1 decrement 10
sh standby:
Vlan301 - Group 10
State is Standby
4 state changes, last state change 00:36:24
Virtual IP address is 10.10.253.254
Active virtual MAC address is 0000.0c07.ac0a
Local virtual MAC address is 0000.0c07.ac0a (v1 default)
Hello time 3 sec, hold time 10 sec
Next hello sent in 2.352 secs
Preemption enabled
Active router is 10.10.253.253, priority 205 (expires in 8.640 sec)
Standby router is local
Priority 200 (configured 200)
Track object 1 state Up decrement 10
Group name is "hsrp-Vl301-10" (default)
05-19-2015 06:37 PM
Hello,
Please paste the track config and output of show version from both the nodes
08-19-2015 03:32 AM
I'm sorry I'm giving you some feedback just now... had to work on other projects and lost track of some work I was doing.
Unfortunately I removed the tracking from the standby router and also had to replace the active one. Now it shows "Track object 1 state Up decrement 10". Maybe it was related to different ios version.
Thanks anyway.
Bye
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide