04-01-2013 12:00 PM - edited 03-07-2019 12:34 PM
I am trying to get logged into the web interface of one of my switches. I have the following in my config:
ip http server
ip http authentication aaa
ip http secure-server
and I also setup a trivial username/password to test. This switch is setup to use RADIUS, but I cannot seem to login to it with the username/password I use when accessing it via SSH and I also cannot access it using the trivial username/password I added to the local user database. What am I missing?
Solved! Go to Solution.
04-01-2013 02:13 PM
Image WITH WEB BASED DEV MGR
ip http server
ip http secure-server
ip http authentication local
Are your rsa keys generated too?
Crypto key generate rsa
https://supportforums.cisco.com/docs/DOC-3392
Hope this helps
Sent from Cisco Technical Support iPhone App
04-01-2013 02:13 PM
Image WITH WEB BASED DEV MGR
ip http server
ip http secure-server
ip http authentication local
Are your rsa keys generated too?
Crypto key generate rsa
https://supportforums.cisco.com/docs/DOC-3392
Hope this helps
Sent from Cisco Technical Support iPhone App
04-02-2013 06:54 AM
That worked great! Must've been the AAA that was hanging me up.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide