I had to upgrade my IOS on my 3524 switch,

[cataula69]

I upgraded my IOS on my 3524 switch, and I think somehow i deleted my startup config.text file. How do I restore my config.text files

[bjw]

If you have a copy off-line, you could use a tftp copy to get it to the switch.

[bjw]

Another note, if you haven't reloaded/restarted your switch, and a >show running-config shows correct config parameters, you can just do a >copy running-config startup-config and the config file should be recreated

[cataula69]

bjw,

thanks for responding. this is what i am getting ex: switch:

I have tried copying another config, but the switch will not allow it. I think the error was no bootable file. it appears to be stuck in boot mode. I cannot get back to the user mode > or privilge mode #

[bjw]

Sounds like you need to reload IOS from Rommon and try again.

http://www.cisco.com/en/US/customer/products/hw/switches/ps607/products_tech_note09186a0080094955.shtml#mon