i have a question :)

[fb_webuser]

does Cisco 2600 series switch support 802.1x and DHCP snooping?

---

Posted by WebUser Neon Rain

[fb_webuser]

Depends on image. Generally support as I know

---

Posted by WebUser Aleksandr Yanovskiy

[Leo Laohoo]

2600 switch???

[fb_webuser]

http://www.tftp-server.com/ You can use this for MS platform. One time I have no responsibility lo load image by TFTP, I loaded image 30 minutes, by tftp it takes near 5 minutes.

When you choose speed of Xterm, for exmaole 9600, its 9600bits per second. So you can calculate time you need to load image

---

Posted by WebUser Aleksandr Yanovskiy

[fb_webuser]

leolaohoo, you are right 2600 is router

---

Posted by WebUser Aleksandr Yanovskiy

[fb_webuser]

actually i meant legacy switches below catalyst 2950 series, i read in some pages which suggested we have to add new interfaces to support 802.1x features in legacy switches/routers so... well thanks for the info n the link.

---

Posted by WebUser Neon Rain

[Oleksandr Nesterov]

Hi Neon

Catalyst 2960 supports mentioned features.

You can run "Cisco Feature Navigator" to check which image you need for it.

HTH,

Alex