I'm trying to find the packages.conf file for a 9200L

[david-robinson]

I have put this question into Google about 10x in the past 20 minutes. 
I keep getting directed to this forum, but I still can't find the answer. 

--> I am trying to convert the 9200L from Bundle Mode to Install Mode, but I have no packages.conf file. 

I gathered the following from my research in order to change the modes (I think it's correct):
===========================

Confirm PACKAGES.CONF file exists in flash:
--> dir flash:

Confirm relevant .PKG files exist and correspond to current IOS version:

--> more packages.conf

Change from Bundle Mode to Install Mode:

--> conf t
--> no boot system
--> boot system flash:packages.conf
--> end
--> wr mem
--> reload

=====================

This is a Lab Switch so I'm not worried about losing anything. 

Thanks in advance!

-David R. 

[Leo Laohoo]

Post the complete output to the following commands:

sh boot
dir flash:*.conf

[david-robinson]

Hi Leo,

GOC-SHA-S117-AS1#sho boot
---------------------------
Switch 1
---------------------------
Current Boot Variables:
BOOT variable = flash:cat9k_lite_iosxe.17.09.05.SPA.bin;

Boot Variables on next reload:
BOOT variable = flash:cat9k_lite_iosxe.17.09.05.SPA.bin;
Manual Boot = no
Enable Break = no
Boot Mode = DEVICE
iPXE Timeout = 0

GOC-SHA-S117-AS1#dir flash:*.conf
Directory of flash:/*.conf

Directory of flash:/

32437 -rw- 4908 Feb 12 2024 08:52:34 -06:00 cat9k_lite_iosxe.17.09.05.SPA.conf
1956839424 bytes total (1305157632 bytes free)

=

=

=This is a 9200L running in Bundle Mode.

Thank you.