01-10-2007 06:13 AM - edited 03-05-2019 01:42 PM
Hi,
I need a router with at least 4 routed (layer 3) fastethernet ports available on it.
I have been cheking the 2800 series routers, and I can't find a router with 4 or more fastethernet routed ports.
Can anyone tell me what router model has at least 4 fastethernet routed ports??
Thanks in advance.
01-10-2007 06:26 AM
Hi
You can make use of Cisco 1841 router with HWIC-4ESW card which has 4 switch ports.
If it doesn't solve your purpose do revert back more on your requirement.
regds
01-10-2007 07:17 AM
Hi,
Thanks for your answer.
Is there some module option for 2800 series router that provides 4 or more fastethernet routed ports??
01-10-2007 06:33 AM
I have been looking at the same area lately. Allot depends on what you are willing to spend. I have looked and most like the 2600 series only come with two on board. You can then buy a NM-2FE2W and increase the count to 4 interfaces. If you need more processor power look at the 3600 series. It has no on board until the 3660 but you can get a 3620 with two NM's that I mentioned before. That would be very inexpensive especially if you purchased used/referbished. Or you can go with the higher end products like the 7000 series and get an additional blade. Some of these routers (2600/3600)are end of life so you may need to buy used.
-Joe
01-10-2007 11:23 AM
Like I said I am looking for the same thing. I talked to Cisco and the 2811 with a NM-16ESW is probably what you are looking for. Retail on the router is $2400 and the NM should be around $1700 list. You can get them for less through Optimous Solutions or CDW so shop around and you will get a better price. I confirmed that you can IP each port just as you can the built in ports.
-Joe
02-01-2007 02:20 AM
Dear
S. Debenito i can't trace any person to help me, at the mean time i see ur message i also send this message with a lots of hope; please inform me the actual price list of CISCO 1700 and 1800 series routers for Training Purpose only.
If u willing to send then please send the details in this mail ID:--
With Best
Regards and Warm wishes for New Year
Ujjwal.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide