11-09-2019 04:46 PM - edited 11-09-2019 05:13 PM
Hi Everyone,
I have to create a named ACL to allow VLAN105 to access to NAT address pool,
Using NAT overload on the pool,
the NAT Pool public Address Range is 183.1.0.0/26
the VLAN 105 network is 192.168.2.0/25
i have attached the packet tracer file as well using zip, Any help would be much appreciated, thank you.
So far i have configured this on the Blue Router, but i don't see any translations when i type 'show ip nat statistics' command.
!
hostname Blue
!
!
!
!
ip dhcp excluded-address 192.168.2.126
!
ip dhcp pool VLAN105
network 192.168.2.0 255.255.255.128
default-router 192.168.2.126
!
!
!
no ip cef
no ipv6 cef
!
!
!
username Blue password 0 ccna34
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface Loopback0
ip address 192.168.2.145 255.255.255.248
!
interface GigabitEthernet0/0/0
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/1/0
ip address 192.168.2.153 255.255.255.252
encapsulation frame-relay
frame-relay map ip 192.168.2.153 115
ip nat inside
clock rate 2000000
!
interface Serial0/1/0.115 point-to-point
no ip address
clock rate 2000000
shutdown
!
interface Serial0/1/1
ip address 70.14.1.13 255.255.255.252
encapsulation ppp
ip nat outside
!
interface Vlan1
no ip address
shutdown
!
router eigrp 10
passive-interface Loopback0
network 192.168.2.152 0.0.0.3
!
ip nat pool VLAN105 183.1.0.1 183.1.0.62 netmask 255.255.255.192
ip nat inside source list VLAN105 pool VLAN105 overload
ip classless
ip route 0.0.0.0 0.0.0.0 70.14.1.14
!
ip flow-export version 9
!
!
ip access-list extended VLAN105
permit ip 192.168.2.0 0.0.0.127 183.1.0.0 0.0.0.63
permit ip any any
!
banner motd ^C^C
!
!
!
!
!
line con 0
exec-timeout 0 0
logging synchronous
!
line aux 0
!
line vty 0 4
ipv6 access-class VLAN105 in
password cisco
login
!
!
!
end
Blue(config)#do show ip nat trans
Blue(config)#do show ip nat stat
Total translations: 0 (0 static, 0 dynamic, 0 extended)
Outside Interfaces: Serial0/1/1
Inside Interfaces: Serial0/1/0
Hits: 0 Misses: 1425
Expired translations: 77
Dynamic mappings:
-- Inside Source
access-list VLAN105 pool VLAN105 refCount 0
pool VLAN105: netmask 255.255.255.192
start 183.1.0.1 end 183.1.0.62
type generic, total addresses 62 , allocated 0 (0%), misses 0
11-09-2019 06:15 PM
To all concerned,
It is very clear this thread is school work.
Help the students learn: Post the links to documents and configuration guides.
Please refrain from handing out answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted | |
---|---|---|---|
06-05-2024 12:07 AM | |||
04-14-2025 11:51 PM | |||
11-16-2020 12:18 PM | |||
02-25-2024 08:23 AM | |||
01-09-2024 09:23 AM |