I see the next LOG in a Switch Catalyst WS-C4506E-S7L+96

[dchavarria]

Hello, I see the next LOG in a Switch Catalyst WS-C4506E-S7L+96, please someone can help me how  to understand this isue and find the solution. Thank you.

*Sep  5 17:50:51.465: %SFF8472-5-THRESHOLD_VIOLATION: Te1/1: Rx power low alarm; Operating value: -40.0 dBm, Threshold value: -13.9 dBm.

David Chavarria M.

[acampbell]

Hi,

From the Cisco Error Message Decoder tool

%SFF8472-5-THRESHOLD_VIOLATION:

[char]: [char]; Operating value: [char], Threshold value: [char].

The specified port is not connected, or it is connected to a damaged fiber optic cable.

Recommended Action: If the message relates to an enabled but unconnected DOM transceiver, shut the port to stop the alarm messages. If the alarm persists, or relates to an enabled and connected transceiver, contact your Cisco technical support representative.

Related documents- No specific documents apply to this error message.

Regards,
Alex.
Please rate useful posts.