IE-2000-4TS-G-L Data sheet info

[Stefan Mihajlov]

I have a tender where I previously specified the IE-2000-4TS-G-L switch. Since it has reached End of Sale, the suitable replacement is the IE-3100-4T2S-E. However, I have certain required specifications that are not explicitly mentioned in the documentation:

• Switching capacity: minimum 4.8 Gbps
• Minimum forwarding rate for 64-byte packets: 3.5 Mpps
• Support for a minimum of 4,000 VLAN IDs
• Flash memory: minimum 64 MB
• UDLD support
• Support for Ethernet ring

Can you confirm if the IE-3100-4T2S-E meets these requirements?

[Flavio Miranda]

@Stefan Mihajlov 

• Switching capacity: minimum 4.8 Gbps

Not mentioned. They only state that the switch can be with 20 Gigabit Ethernet 

• Minimum forwarding rate for 64-byte packets: 3.5 Mpps

Forwarding rate

Line rate for all ports and all packet sizes

• Support for a minimum of 4,000 VLAN IDs

     256

• Flash memory: minimum 64 MB

4GB SD memory card for IE ( SD card is optional and is not shipped by default with the switch. )

• UDLD support

Not mentioned on the Data Sheet

• Support for Ethernet ring

Delivers multiple rings, redundant ring topology for new network configurations