IE-4000 series switch not forwarding broadcast messages
I have been trying to configure an HSR capable switch to forward broadcast messages from an communication device (COM10) through the switch and to PC to snoop those packets with Wireshark. Now the thing is that if I would connect that communication device straight to PC I can see those packets immediately.
Figure 1: Connecting straight to PCBut when plugging the device to gigabitEthernet 1/1 and PC to fastEthernet 1/5 ports I am still able to ping back and forth but those broadcast messages are not being forwarded.
GigabitEthernet 1/1 informationFastEthernet 1/5 information
If anyone could point me to the right direction I would be very grateful!
Wi-Fi 6 vs. 5G: Who is the winner? What’s the best one? Which one to choose?You may have heard these topics in many articles and conversations. But the fact is that if you choose one over the other, you may fail to provide your organization with the best ...
Whilst carrying out resilience testing to confirm igp/ebgp multipath is working, I have stumbled upon the below issue.The attached sketch crudely shows the topolgy of the network. 2 cores with a cross connect running ibgp, from each of the cores I have 1 ...
Learn how Cisco wireless assurance provides real-time and historical analytics for deep network visibility and simplified troubleshooting.
Learn how you can easily manage all of your connected devices and services and identify and solve issues before they...
I have a device connected to an access switch port. I would like to configure a net flow to gather the amount of traffic going via the interface. I will be sending all that data to SolarWinds. My question is how do I configure a netflow on WS-C6506. I tri...
Hello, We are working on a spare switch (with 12 fibre modules), which needs to be used as the failover switch in our company data centre. Cisco switch model : WS-C3750-12S(PowerPC405) Can you confirm the below : i. Does this switch su...