02-27-2024 01:50 PM
Hi team!
Are input classification counters correctly displayed for the IE5000 and "show policy-map"?
They all seem to be zero on my switch, for example:
Service-policy input: my-policy
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0000 bps, drop rate 0000 bps
Match: any
Set qos-group 2
Switch IE-5000-12S12P-10G, 15.2(7)E3
Kind regards,
Lennart
02-27-2024 02:01 PM
I cannot say in your case but over a couple of decades have seen various switches not correctly update such stats. Fortunately, switch would process QoS correctly and possibly update ASIC stats correctly.
02-27-2024 02:36 PM
Yes, the input classifications seem to work because I'm happy with egress traffic!
02-27-2024 05:30 PM
BTW, often the kind of thing corrected in later IOS releases.
02-27-2024 03:14 PM
Stats updating is sometimes a problem across various platforms, but if you are happy with the QoS requirements, then i guess you should be fine.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide