01-05-2015 10:43 AM - edited 03-07-2019 10:05 PM
Team,
Wish you all very happy new year 2015.
One of our customer like to implement IP SLA for the load sharing the network traffic between dual ISP link.
route-map PBR permit 10
match ip address 4
set ip next-hop verify-availability 10.2.3.2 1 track 1
set ip next-hop verify-availability 10.2.4.2 2 track 2
when the first object goes down the traffic Is not forwarded to the second nexthop . even when reversing the sequence of the next hops does not failover to the scond next hop and packets are dropped
Could any one help with the example, scenarios with configuration of IP SLA configuration.
Thanks
01-05-2015 10:53 AM
Hi,
Happy new year to you as well.
Can you post the SLA and static route configs as well?
01-05-2015 07:59 PM
Reza,
Let me post the original ip sla config cmd today
01-05-2015 10:59 AM
Reza,
Customer did not provide the configuration. He wants us to provide them the solution.
01-05-2015 11:40 AM
It's going to be difficult without seeing the original configuration.
I suspect Reza (correct me if I'm wrong :-)) wants to see the tracking configuration because it may be that the IP your pinging is reachable via both next hops in which case what can happen is -
10.2.3.2 goes down and the route is removed. The new route is installed and the IP being tracked can now be pinged via the second next hop and so the original route is reinstalled and so on.
Of course without seeing the configuration that is just a guess.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide