07-12-2016 09:30 AM - edited 03-08-2019 06:36 AM
Hi, I have this router Cisco 2811, had to erase all the configuration, because I changed my E1 providor.
Now I cant make or receive calls. Please help!
here is my show run
Current configuration : 3249 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CUCMTCF
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
no logging buffered
no logging console
enable secret 5 $1$0iXf$9YERhi2mGp2fwSODl4CzK1
!
no aaa new-model
clock timezone utc -6
network-clock-participate wic 0
network-clock-select 1 E1 0/0/0
!
!
!
ip cef
no ip dhcp use vrf connected
!
ip dhcp pool Voice
!
!
no ip domain lookup
multilink bundle-name authenticated
!
isdn switch-type primary-ni
!
!
!
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
!
!
voice class codec 1
codec preference 1 g729r8
codec preference 2 g711ulaw
codec preference 3 g711alaw
codec preference 4 g729br8
!
!
!
voice class h323 1
h225 timeout tcp establish 3
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /^0/ // type any national plan any isdn
!
!
voice-card 0
dspfarm
dsp services dspfarm
!
!
!
!
!
archive
log config
hidekeys
!
!
controller E1 0/0/0
pri-group timeslots 1-10,16
!
!
!
!
!
interface FastEthernet0/0
description DATOS
ip address 192.168.10.200 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.110.17.1 255.255.255.0
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 10.110.17.1
!
interface Serial0/0/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!
interface Serial0/1/0
no ip address
shutdown
clock rate 2000000
!
interface Serial0/1/1
no ip address
shutdown
clock rate 2000000
!
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/0/0:15
!
voice-port 0/2/0
!
voice-port 0/2/1
!
voice-port 0/2/2
!
voice-port 0/2/3
!
voice-port 0/3/0
!
voice-port 0/3/1
!
voice-port 0/3/2
!
voice-port 0/3/3
!
!
!
!
!
dial-peer voice 1 pots
destination-pattern 0.T
direct-inward-dial
port 0/0/0:15
forward-digits all
!
dial-peer voice 1000 voip
preference 2
destination-pattern 0.T
voice-class codec 1
session target ipv4:10.110.17.1
dtmf-relay h245-alphanumeric
!
dial-peer voice 1005 voip
description llamadas Salientes Paises
destination-pattern 5T
voice-class codec 1
!
!
!
telephony-service
sdspfarm units 5
sdspfarm transcode sessions 128
no auto-reg-ephone
max-ephones 40
max-dn 130
ip source-address 192.168.10.200 port 2000
timeouts interdigit 5
system message (TCF) BIT GUATEMALA
max-conferences 8 gain -6
transfer-system full-consult
07-12-2016 10:17 AM
Hi, now i'm just having outgoing calls that are failing.
Phone displays unknown number
Thanks
07-12-2016 11:04 AM
*Jul 12 18:33:53.451: %CALL_CONTROL-6-CALL_LOOP: The incoming call has a global identfier already present in the list of currently handled calls. It is being refused.
getting this on my debug
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide