09-23-2020 02:27 PM
Hello Team,
Can I do the inter Vlan routing with WS-C3560G-24TS-S and 15.0(2)SE11 ,SW Image C3560-IPBASEK9-M .
Asanka
Solved! Go to Solution.
10-31-2020 04:01 PM
Thanks for the valuable advice, It helped much.
09-23-2020 03:59 PM
Yes, although your IGP options are limited with the IPBase feature set. (I recall you only have static and RIP; plus you don't need either if all the VLAN SVIs are on the 3560, just need to insure "ip routing" is configured.)
10-31-2020 04:01 PM
Thanks for the valuable advice, It helped much.
10-31-2020 04:42 PM
Glad that helped.
BTW, besides SVIs, you can also route directly on the 3560 using "routed" interfaces (non switchport). I.e. they and/or SVIs might be used.
Static routing statements, or an IGP, like RIP, are only needed if the destination network isn't directly connected.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide